165cm aluminum telescopic rod
The aluminum telescopic rod is included in the floor set (along with an instant or industrial handle and corresponding floor cushions).
Thanks to the high quality duralumin, our rod is lightweight, yet extremely durable, which guarantees its long-term use without worrying about damage.its maximum length (when unfolded) is 1.65m. You can adjust this length according to your needs.
The telescopic rod can also complement the window cleaning kit. Thanks to it, you will clean windows without having to lean out or use a ladder.
The rod is sold together with a conus.
- Adjustable length up to 1.65m, allowing access to hard-to-reach areas
- Durable duralumin construction ensures long-lasting use without worrying about damage
- Articulation allows for effective cleaning of hard-to-reach areas
Floor set
The floor set consists of a handle and a telescopic rod. On the handle there is a clip with a lock and a clip with a fuse, in which the telescopic rod is embedded.
- The Euro-fuse (1) should be grasped at the sides and pulled out of the clip (2), insert the telescopic rod (6) into it so that the holes in the rod coincide with the holes in the clip.
- Insert the fuse (1) into the holes, after a slight rotation of the rod the fuse will pop into place
- Tighten the thread on the striker (2).
- Use the thread on the telescopic rod (8) to adjust its length.
- By pressing the clip with lock (3) loosen the handle arm (4) , put the floor cushion and align the handle arm, which will fix the clip with lock.
- The floor set is ready for use.
- If you need to change the tilt of the handle, put the toggle cap (9) between the handle (5) and the telescopic rod (6).
Window care express
Use the set, consisting of the Window Care Express, conus, toggle and telescopic rod, to clean high windows.
- 1. Press the tabs located on the toggle cap (9), and then slide it into the hole in the telescopic rod (6).
- 2. Press the tabs on the conus (7) and slide it into the hole of the toggle cap (on the opposite side to the telescopic rod).
- 3. Put the Window Express (10) on the conus (7).
- 4. Use the thread on the telescopic rod (8) to adjust its length
- 5. With the joint (9) change the inclination of the Window Care Express as needed.
All of our products have a product card available with a description of all properties. We encourage you to read the card of this product, which you will find at the link below.